| Article #11 - Generating a Data Capture with Configuration Utility |
|---|
| Updated:02-16-2006 - Views: 811 |
| Datacapture Instructions.
1. Make sure no one else will be using the printer. 2. End the writer on the 400. 3. Start the I-O Configuration Utility (CU) 4. Highlight the PrintServer (PS) 5. Select Options 6. Select Datacapture (leave the selection as Buffer) 7. Select Browse 8. On the right side of the screen select a target destination where a file will be created. 9. On the left side of the screen give the file a descriptive name, (your name), leaving the extension as .dmp. 10. Select OK. 11. Select Start. 12. On the 400 start the writer. 13. From the 400 send the job. 14. The byte counter in the CU should now increment. 15. Give the datacapture enough time to cover the actual printing of the job, if the job were to print. 16. Select stop. 17. Email the file to: support@iocorp.com |
|
Use the form below to submit a comment on this article for inclusion into the knowledgebase. End-users are welcome to submit articles relating to any category in the knowledgebase. Submit a comment in response to the knowledgebase article. Please keep the response professional, the content may be modified by the Knowledgebase Administrator. Before posting the comment will be reviewed and may be edited for brevity, structure and content. |