| Article #81 - How can I test my keyboard for non-functioning keys ? |
|---|
| Updated:02-18-2006 - Views: 484 |
| From a power off condition, press and hold down the Reset key while powering on the terminal. When the display comes up with the Configuration Screen, release the Reset key and press the letter 'K' to enter a special keyboard diagnostic screen. Press each key individually and monitor the screen to ensure proper key functioning. After testing the keys press enter to exit and return to your normal session.
NOTE: Press Enter only after you have tested all other keys. Pressing Enter will exit the keyboard test. |
|
Use the form below to submit a comment on this article for inclusion into the knowledgebase. End-users are welcome to submit articles relating to any category in the knowledgebase. Submit a comment in response to the knowledgebase article. Please keep the response professional, the content may be modified by the Knowledgebase Administrator. Before posting the comment will be reviewed and may be edited for brevity, structure and content. |